ALTO 3D · View all products

45 Degree Camera Mount for Aqara G5, PETG Bracket in White or Black

Choose version →
45 Degree Camera Mount for Aqara G5, PETG Bracket in White or Black45 Degree Camera Mount for Aqara G5, PETG Bracket in White or Black45 Degree Camera Mount for Aqara G5, PETG Bracket in White or Black45 Degree Camera Mount for Aqara G5, PETG Bracket in White or Black45 Degree Camera Mount for Aqara G5, PETG Bracket in White or Black45 Degree Camera Mount for Aqara G5, PETG Bracket in White or Black

Product description

Fixed 45° camera mount for the Aqara G5, 3D printed in PETG. The angled bracket provides a side-angle mounting position; choose white or black to suit your installation. CHECK THE FIT • Fixed 45° angle, not an adjustable-angle mechanism • Designed for the Aqara G5 mounting interface • Mounting holes: 4 mm diameter, spaced 40 × 40 mm • Compare the bracket and mounting direction shown in the photos with your setup before ordering. If unsure, send us a photo of the intended mounting position. WHAT YOU RECEIVE One PETG 3D-printed bracket in your selected colour. Camera, screws and other mounting hardware are not included. INSTALLATION & CARE Use screws and wall fixings suitable for the mounting surface and follow the camera manufacturer's installation instructions. Check that the camera and bracket are securely retained, that cables have enough clearance, and that the camera view is unobstructed after fitting. Do not overtighten fixings. Fine layer lines are a normal feature of 3D-printed parts. Clean with a soft, damp cloth and replace the bracket if it becomes cracked, deformed or damaged. This is an independently made compatible accessory, not an original Aqara product. Aqara and G5 are used only to identify compatibility. ────────────────────────────── PRODUCT SAFETY INFORMATION (EU GPSR 2023/988) Manufacturer: Alto3d Aleksandar Toshovski Seltenbachstr. 8 76327 Pfinztal, Germany E-mail: Safety information: • This product is not a toy. Keep it away from small children — small parts can pose a choking hazard. • Made of 3D-printed PETG plastic. Keep away from open flames and strong heat sources. • Do not use the product if it is damaged.
Color
WhiteBlack

Product Safety and Contact

Artikelreferenz: 4541055600. Questions about safe use or compatibility of this item: Alto 3D Aleksandar Toshovski, Seltenbachstr. 8, 76327 Pfinztal, contact@geroite.com.