PETG knob adapter for connecting a compatible KESO knob cylinder to the Nuki Smart Lock Pro, 5th generation. Check the KESO spindle profile against the product photos before ordering.
COMPATIBILITY
• For Nuki Smart Lock Pro, 5th generation, and the KESO connection shown in the photos
• This KESO version is not the ABUS/CISA adapter
• A separate mounting spacer is required; calculate its thickness from your installation as described below
HOW TO MEASURE THE SPACER
Measure the spindle projection from the outer surface of the rosette to the spindle tip.
Required spacer thickness = measured spindle projection − 6 mm.
Example: a 10 mm projection requires a 4 mm spacer.
The 4 mm example is not a universal minimum. If your measurement gives zero or a negative result, or you are unsure of the profile or measurement, send us a photo and dimensions before ordering so we can check your installation.
Compatible mounting spacers are sold separately:
WHAT YOU RECEIVE
One PETG 3D-printed KESO adapter. The Nuki smart lock, door cylinder, mounting spacer, screws and adhesive are not included.
INSTALLATION & CARE
Follow the smart-lock manufacturer's fitting instructions. Do not force the adapter onto an incompatible spindle. After fitting, check the lock operation with the door open before relying on it. Fine layer lines are normal for 3D-printed parts.
This is an independently made compatible accessory, not an original Nuki or KESO product. Brand names identify compatibility only.
──────────────────────────────
PRODUCT SAFETY INFORMATION (EU GPSR 2023/988)
Manufacturer:
Alto3d Aleksandar Toshovski
Seltenbachstr. 8
76327 Pfinztal, Germany
E-mail:
Safety information:
• This product is not a toy. Keep it away from small children — small parts can pose a choking hazard.
• Mounting accessory for installation by adults. After installation, verify that your door lock operates correctly before relying on it.
• Made of 3D-printed PETG plastic. Keep away from open flames and strong heat sources.
• Do not use the product if it is damaged.
Produktsicherheit und Kontakt
Artikelreferenz: 4350631296. Fragen zur sicheren Verwendung oder zur Kompatibilität dieses Artikels: Alto 3D Aleksandar Toshovski, Seltenbachstr. 8, 76327 Pfinztal, contact@geroite.com.
