ALTO 3D · Alle Produkte

Long-Rosette Spacer for SwitchBot Lock Ultra, PETG, Select Width and Thickness

Ausführung wählen →
Long-Rosette Spacer for SwitchBot Lock Ultra, PETG, Select Width and ThicknessLong-Rosette Spacer for SwitchBot Lock Ultra, PETG, Select Width and ThicknessLong-Rosette Spacer for SwitchBot Lock Ultra, PETG, Select Width and ThicknessLong-Rosette Spacer for SwitchBot Lock Ultra, PETG, Select Width and ThicknessLong-Rosette Spacer for SwitchBot Lock Ultra, PETG, Select Width and ThicknessLong-Rosette Spacer for SwitchBot Lock Ultra, PETG, Select Width and Thickness

Produktbeschreibung

PETG spacer for mounting a SwitchBot Lock Ultra over a long door rosette. Choose rosette width, thickness and black or white from the available options. MEASURE BEFORE ORDERING • Rosette Width means the side-to-side width of the long rosette, not its diameter or thickness. • Thickness means the rosette height above the door surface. • The part includes an additional 1 mm base, so overall part height is the selected thickness plus 1 mm. A 5 mm selection has a 6 mm overall height. • Allow for adhesive thickness when checking the final mounting position. WHAT YOU RECEIVE One PETG spacer in your selected size and colour. The SwitchBot Lock Ultra shown in the photos is not included. FITTING Compare the rosette and mounting plate with the gallery before ordering. Follow SwitchBot's fitting instructions for Lock Ultra and use adhesive suitable for your door surface and mounting plate. Test locking, unlocking and key operation with the door open. Do not force the mechanism or use the setup if it binds. This independently made accessory is not an original SwitchBot product. SwitchBot Lock Ultra is named only to identify compatibility. ────────────────────────────── PRODUCT SAFETY INFORMATION (EU GPSR 2023/988) Manufacturer: Alto3d Aleksandar Toshovski Seltenbachstr. 8 76327 Pfinztal, Germany E-mail: Safety information: • This product is not a toy. Keep it away from small children — small parts can pose a choking hazard. • Mounting accessory for installation by adults. After installation, verify that your door lock operates correctly before relying on it. • Made of 3D-printed PETG plastic. Keep away from open flames and strong heat sources. • Do not use the product if it is damaged.
Thickness
1 mm2 mm3 mm4 mm5 mm6 mm7 mm8 mm9 mm10 mm11 mm12 mm13 mm14 mm15 mm
Rosette Width
30 mm33 mm35 mm37 mm40 mmCUSTOM
Color
BlackWhite

Produktsicherheit und Kontakt

Artikelreferenz: 4410355339. Fragen zur sicheren Verwendung oder zur Kompatibilität dieses Artikels: Alto 3D Aleksandar Toshovski, Seltenbachstr. 8, 76327 Pfinztal, contact@geroite.com.