Name: WELOCK U81 Spacer Plate for EU Profile Cylinders, 1–30mm PETG Adapter
SKU: welock-u81-spacer

Spacer plate for mounting a WELOCK U81 smart lock on an EU profile cylinder door. Choose a thickness from 1 to 30 mm to suit the measured gap between your door surface and metal cylinder adapter. HOW TO CHOOSE THE THICKNESS 1. Check that you have the WELOCK U81 and an EU profile cylinder. 2. Measure from the door surface to the metal cylinder adapter at the mounting position. 3. Select the matching thickness and white or black colour from the menus. WHAT YOU RECEIVE One 3D-printed PETG spacer plate in the selected size and colour. The smart lock, cylinder, rosette and mounting kit are not included. FITTING The spacer sits between the door surface and the lock mounting area. Follow the WELOCK installation instructions and check that the fixings and clearances are appropriate for your selected thickness. Test correct lock operation after installation. An independently made compatible accessory, not an official WELOCK product. Fine layer lines are normal for 3D-printed parts. ────────────────────────────── PRODUCT SAFETY INFORMATION (EU GPSR 2023/988) Manufacturer: Alto3d Aleksandar Toshovski Seltenbachstr. 8 76327 Pfinztal, Germany E-mail: Safety information: • This product is not a toy. Keep it away from small children — small parts can pose a choking hazard. • Mounting accessory for installation by adults. After installation, verify that your door lock operates correctly before relying on it. • Made of 3D-printed PETG plastic. Keep away from open flames and strong heat sources. • Do not use the product if it is damaged.

Artikelreferenz: 4556996004. Fragen zur sicheren Verwendung oder zur Kompatibilität dieses Artikels: Alto 3D Aleksandar Toshovski, Seltenbachstr. 8, 76327 Pfinztal, contact@geroite.com.

WELOCK U81 Spacer Plate for EU Profile Cylinders, 1–30mm PETG Adapter

Produktbeschreibung

Produktsicherheit und Kontakt