ALTO 3D · 3D configurators

Nuki Cap for Pro and Ultra

A protective case for your Nuki Smart Lock Pro (5. Generation) or Ultra.
Match the cap to the cylinder and rosette of your door.

View product photos ·

Your Design

Sectional view of the white Nuki Cap with base and inserted Nuki Pro on the door

Color

Product example

Original model · Drag to rotate · Scroll to zoom
Dimensional changes as local design preview, yet no production release.

CONFIGURATION 01

Your Nuki Cap.

Choose your rosette and enter its dimensions. Then choose your Nuki model.

01 · Rosette

Rosette on your door

Backplate width at the cylinder38 mm

Escutcheon diameter55 mm

Rosette height over door surface6 mm

Cylinder overhang3 mm

PRODUCT PHOTOS

The Nuki Cap in detail

Choose a photo for the close-up view.

Black Nuki Cap next to the ring-shaped base with red 3M adhesive strip and two screws — Cap, adhesive base and screws

Mounted black cap with visible recess for charging port — Charging access at the bottom

Silver Nuki on the black base plate with cap removed — Base with Nuki reference

Removable cap next to the base with two visible threaded inserts — Screwing of the base

Nuki button visible through the round opening on the front of the black cap — Version with button opening

Product Description

Protective case for Nuki Pro and Ultra

The cap encloses the knob and makes it difficult to turn the Smart Lock by hand or remove it from the door. This is especially practical in holiday apartments, offices and shops where several people have access to the door.

The charging port remains accessible through a recess on the bottom. The cap can remain mounted for charging. If you also want to operate your lock via the Nuki button, choose the cap with button opening. For a closed front, deselect the opening.

Assembly and fit

The base is attached to the door with 3M VHB tape. Then screw the cap with the included screws on the base. The installation does not require drilling holes in the door.

Choose your rosette and enter its dimensions. Then choose your Nuki model.

Material and color

The housing is made of robust, wipeable PETG in 3D printing. You can configure it here in black, white or gray. The cap is an accessory from ALTO 3D for the Nuki Smart Lock Pro of the 5. Generation and the Nuki Smart Lock Ultra.

Manufacturer and safety information ↓

HERSTELLER & PRODUKTSICHERHEIT

Safe installation and use

Product image of the ALTO 3D protective case for Nuki — ALTO 3D · Model family m-4e30890f

Product and manufacturer

PETG protective case with base, cap and mounting screws for Nuki Smart Lock Pro (5. Generation) and Ultra. Available with or without button opening.

Alto 3D Aleksandar Toshovski
Seltenbachstr. 8
76327 Pfinztal, Deutschland
contact@geroite.com

Safety instructions

Mount only by adults. Keep screws and other small parts out of the reach of young children. Risk of suffocation! The housing is not a toy.
After installation, check with the door opened if the lock can be completely locked and unlocked. Close the door only afterwards.
Keep away from open flames and excessive heat. Do not use a damaged housing.

FROM THE MILLIMETERS TO THE FAVOURITE DETAILS.

So it will be yours.

Re-measure.

Check the model and space on your door. The measuring tool shows you which measurements are important.

Fine tune.

Choose dimensions and finish. The real 3D geometry changes with your settings.

Everything in view.

Dimensional designs are personally checked before a quote.

ALTO 3D / FILL THE GAP

For the small gaps
in the big everyday life.

Functional 3D printing ideas from our Etsy shop.
Now with room for your own measurements.

To the configuration ↑