ALTO 3DFill the gap Cart 0

ALTO 3D · 3D configurators

Nuki 5 Pro: ABUS Adapter & Spacer plate

Your ABUS cylinder. Your Nuki 5 Pro. Two parts that have to fit together.

The adapter transmits the rotation. The spacer plate creates the space for mounting.

ABUS D adapter on its own and fitted to the spacer
Color

Example: round rosette and ABUS D. Adjust the measurements to your door.

Original adapter geometry. Nuki and mounting plate as reference; the mounting view is not a fit confirmation.

Your configuration

Example measurements are prefilled. Replace them with your own measurements before ordering.

01 · Door and rosette

The Euro-profile opening is centred in this illustration; the turning axis sits above it. The exact position depends on your rosette.

Configure spacer with these measurements →

The adapter and spacer are added to the cart separately.

How the parts fit together

  1. The matching ABUS adapter is mounted on the exposed cylinder shaft. In the round, the cross holes must be aligned and secured with suitable fixing.
  2. The spacer plate supports the original Nuki mounting plate in the required position. The adapter transmits the rotary movement through the center.
  3. The Nuki 5 Pro snaps onto its mounting plate and engages the adapter. Check locking, unlocking and external controls when the door is open.

ABUS Round requires a spacer at least 10 mm thick. Measure your door; 10 mm does not guarantee a fit.

Delivery per item: an adapter or a spacer plate. Nuki, cylinder, original mounting plate and fixing material are not included.

Unsure about the choice? Send us a photo and the dimensions of your cylinder shaft.